|
|
| SPECS: Benches are available with Pau Lope®, redwood, douglas fir, treated pine, aluminum or recycled plastic slats. Most picnic tables and trash receptacles are available with the same materials as our benches. Please call for further details on any or all of the above-mentioned products. |
Support frames are constucted of galvanized steel and left natural. Many other colors are available on request (an additional charge may apply). One model is available with cast concrete supports. Benches are available with permanent (in-ground) or surface mount supports. |
| Recycled plastic slats are available in cedar, weathered or gray color. Most support frames are available with a baked-on polyester powder finish. |
Powder coating colors include black, red, burgundy, medium green, dark green or bronze. |
| Pau Lope® is a South American hardwood which is extremely dense and practically impervious to harsh weather. It holds the highest decay and insect resistence rating from the U.S. Forest Products Laboratory. It also resists rot, mildew and fire. Life expectancy is in excess of 50 years with little or no surface and/or structural deterioration. Pau Lope® naturalizes to a soft, silvery patina and embraces elegance and beauty. |
| Benches |
(Click to enlarge images)
|
| 750 PARK BENCH |
750-6P Park Bench
SUPPORTS: Heavy-duty cast iron.
CROSS BRACE: 1 5/16” O.D. galvanized pipe.
|
CENTER STRAP: 1/4” x 1” steel bar.
SLATS: 2” x 3” nominal. Available with #1 pressure treated southern yellow pine, clear all heart, free of heart center redwood, or clear douglas fir.
HARDWARE: Zinc plated.
FINISH: Polyester powder coated frame.
• Bench may be free standing or surface mounted.
MODEL NO.
750-6T 6’ Treated Pine
750-6R 6’ Redwood
750-6D 6’ Douglas Fir
750-8T 8’ Treated Pine
750-8R 8’ Redwood
750-8D 8’ Douglas Fir
NOTE: Custom sizes available upon request and availability.
|
| 2233 Park Bench |
|
SUPPORTS: 3/8” x 4” steel bar and 2 3/8” O.D. steel pipe.
SLATS: 2” x 4” or 4” x 4” nominal. Available with #1 pressure treated southern yellow pine, clear all heart, free of heart center redwood, clear Douglas fir, pau lope®, or recycled plastic.
HARDWARE: Stainless steel.
FINISH: Polyester powder coated.
• Available with 2x4 of 4x4 slats.
• Choice of Permanent, surface mount, or gull-wing supports. |
560 PARK BENCH
|
SUPPORTS: 1/2” x 3” steel bar and 3” square x 11 ga. steel tube.
SLATS: 2” x 3” nominal. Available with #1
pressure treated southern yellow pine, clear all heart, free of heart center redwood, or clear douglas fir.
CENTER STRAP:3/8” x 1” steel bar.
HARDWARE: Bright zinc plated.
FINISH: Polyester powder coated.
• Choice of permanent, surface mount, or gull-wing supports
|
MODEL NO.
560-6T 6’ Treated Pine
560-6R 6’ Redwood
560-6D 6’ Douglas Fir
560-8T 8’ Treated Pine
560-8R 8’ Redwood
560-8D 8’ Douglas Fir |
466 PARK BENCH
|
SUPPORTS: 2 7/8” O.D. schedule
40 steel pipe.
SLATS: 4” x 4” nominal. Available with #1 pressure treated southern yellow pine, clear all heart, free of heart center redwood, clear douglas fir, or recycled plastic.
|
MODEL NO.
6’ BENCH - 2 SUPPORTS
466-6T 6’ Treated Pine
466-6R 6’ Redwood
HARDWARE: Zinc plated.
FINISH: Polyester powder coated supports.
• Choice of permanent, or surface mount supports.
466-6D 6’ Douglas Fir
8’ BENCH - 2 SUPPORTS
466-8T 8’ Treated Pine
466-8R 8’ Redwood
466-8D 8’ Douglas Fir
RECYCLED PLASTIC BENCH
3 SUPPORTS
466-6PL 6’ Recycled Plastic
466-8PL 8’ Recycled Plastic
|
124 PARK BENCH
|
SUPPORTS: 3/8” x 3” steel bar and
2 3/8” O.D. steel pipe.
SLATS: 2” x 4” nominal. Available with #1 pressure treated southern yellow pine, clear all heart, free of heart center redwood, clear douglas fir, or recycled plastic.
|
HARDWARE: Zinc plated.
FINISH: Polyester powder coated supports.
• Choice of permanent, surface mount, or gull-wing supports.
MODEL NO.
6’ BENCH - 2 SUPPORTS
124-6T 6’ Treated Pine
124-6R 6’ Redwood
124-6D 6’ Douglas Fir
8’ BENCH - 2 SUPPORTS
124-8T 8’ Treated Pine
124-8R 8’ Redwood
124-8D 8’ Douglas Fir
RECYCLED PLASTIC BENCH
3 SUPPORTS
124-6PL 6’ Recycled Plastic
124-8PL 8’ Recycled Plastic
|
111 PARK BENCH
|
 |
SUPPORTS: Reinforced precast concrete.
SLATS: 2” x 6” nominal. Available with #1 pressure treated southern yellow pine.
MODEL NO.
111-6T 6’ Treated Pine Bench |
| 389 PARK BENCH |
FRAME: 2 7/8” O.D. steel pipe with welded 3/8” x 3” steel bar contour seat supports. Permanent installation.
|
SLATS: 2” x 4” nominal. Available with #1 pressure treated yellow pine, clear all heart free of heart center redwood, clear douglas, fir, or recycled plastic.
HARDWARE: Zinc plated.
FINISH: Polyester powder coated frame.
MODEL NO.
#389-6T 6’ Treated Pine
#389-6R 6’ Redwood
#389-6D 6’ Douglas Fir
#389-6PL 6’ Recycled Plastic
|
| 121 & 168 PARK BENCH |
 |
SUPPORTS: 2 3/8” O.D. galvanized pipe
with ends capped.
SLATS: 2” x 4” nominal. Available with pressure treated southern yellow pine, clear all heart, free of heart center redwood, clear
douglas fir, anodized aluminum, or recycled
plastic.
HARDWARE: Zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds.
|
MODEL NO.
PERMANENT STYLE BENCHES:
#121 Permanent Support Only
#121-6T 6’ Treated Pine - 2 supports
#121-6R 6’ Redwood - 2 supports
#121-6D 6’ Douglas Fir - 2 supports
#121-6A 6’ Aluminum - 2 supports
#121-6PL 6’ Recycled Plastic - 3 supports
#121-8T 8’ Treated pine - 2 supports
#121-8R 8’ Redwood - 2 supports
#121-8D 8’ Douglas Fir - 2 supports
#121-8A 8’ Aluminum - 2 supports
#121-8PL 8’ Recycled Plastic - 3 supports |
PORTABLE STYLE BENCHES:
#168 Portable Support Only
#168-6T 6’ Treated Pine - 2 supports
#168-6R 6’ Redwood - 2 supports
#168-6D 6’ Douglas Fir - 2 supports
#168-6A 6’ Aluminum - 2 supports
#168-6PL 6’ Recycled Plastic - 3 supports
#168-8T 8’ Treated pine - 2 supports
#168-8R 8’ Redwood - 2 supports
#168-8D 8’ Douglas Fir - 2 supports
#168-8A 8’ Aluminum - 2 supports
#168-8PL 8’ Recycled Plastic - 3 supports |
| 316 Park Bench |
SUPPORTS: 3/8” x 2 ?” and 3/8” x 4” steel bar.
SLATS: 3” x 4” and 3” x 6” nominal recycled plastic (cedar color only).
FASTENERS: Stainless steel.
FINISH: Polyester powder coated.
• Choice of permanent, surface mount, or gull-wing support option.
|
MODEL NO.
316-5PL. . . .5’ Permanent Mount Bench
316-5PL-SM. . . .5’ Surface Mount Bench
316-5PL-GW. . . .5’ Gull-Wing Support Bench
316-6PL. . . .6’ Permanent Mount Bench
316-6PL-SM. . . .6’ Surface Mount Bench
316-6PL-GW. . . .6’ Gull-Wing Support Bench
316-7PL . . . . 7’ Permanent Mount Bench
316-7PL-SM . . . . 7’ Surface Mount Bench
316-7PL-GW . . . . 7’ Gull-Wing Support Bench
|
| 317 Park Bench |
SUPPORTS: 3/8” x 2 ?” and 3/8” x 4” steel bar.
SLATS: 3” x 4” and 3” x 6” nominal recycled plastic (cedar color only).
FASTENERS: Stainless steel.
FINISH: Polyester powder coated.
• Choice of permanent, surface mount, or gull-wing support option.
|
MODEL NO.
317-5PL. . . .5’ Permanent Mount Bench
317-5PL-SM. . . .5’ Surface Mount Bench
317-5PL-GW. . . .5’ Gull-Wing Support Bench
317-6PL. . . .6’ Permanent Mount Bench
317-6PL-SM. . . .6’ Surface Mount Bench
317-6PL-GW. . . .6’ Gull-Wing Support Bench
317-7PL. . . .7’ Permanent Mount Bench
317-7PL-SM. . . .7’ Surface Mount Bench
317-7PL-GW. . . .7’ Gull-Wing Support Bench
|
| 337 Park Bench |
SLATS: 3” x 4” and 3” x 6” nominal recycled plastic (cedar color only).
FASTENERS: Stainless steel.
FINISH: Polyester powder coated.
• Choice of permanent, surface mount, or gull-wing support option.
|
SUPPORTS: 3/8” x 4” steel bar and 2 7/8” O.D. steel pipe.
MODEL NO.
337-5PL. . . .5’ Permanent Mount Bench
337-5PL-SM. . . .5’ Surface Mount Bench
337-5PL-GW. . . .5’ Gull-Wing Support Bench
337-6PL. . . .6’ Permanent Mount Bench
337-6PL-SM. . . .6’ Surface Mount Bench
337-6PL-GW. . . .6’ Gull-Wing Support Bench
337-7PL. . . .7’ Permanent Mount Bench
337-7PL-SM. . . .7’ Surface Mount Bench
337-7PL-GW. . . .7’ Gull-Wing Support Bench
|
| 338 Park Bench |
SUPPORTS: 3/8” x 4” steel bar and 2 7/8” O.D. steel pipe.
SLATS: 3” x 4” and 3” x 6” nominal recycled plastic (cedar color only).
FASTENERS: Stainless steel.
FINISH: Polyester powder coated.
• Choice of permanent, surface mount, or gull-wing support option.
|
MODEL NO.
338-5PL. . . .5’ Permanent Mount Bench
338-5PL-SM. . . .5’ Surface Mount Bench
338-5PL-GW. . . .5’ Gull-Wing Support Bench
338-6PL. . . .6’ Permanent Mount Bench
338-6PL-SM. . . .6’ Surface Mount Bench
338-6PL-GW. . . .6’ Gull-Wing Support Bench
338-7PL. . . .7’ Permanent Mount Bench
338-7PL-SM. . . .7’ Surface Mount Bench
338-7PL-GW. . . .7’ Gull-Wing Support Bench
|
| 348-6 Park Bench |
 |
FRAME: 2” x 1” x 11 gauge wall and 2” x 2” x 11 gauge wall steel tubing. One-piece welded unit.
SEAT SURFACE: 1” square x 11
gauge wall steel tubing.
DECORATIVE PANEL: 3/8” thick steel.
FINISH: Polyester powder coated.
• Choice of permanent, surface mount or free standing supports.
MODEL NO.
348-1 6’ Permanent Mount
348-2 6’ Surface Mount
348-3 6’ Free-Standing
|
| 740 Park Bench |
|
|
SUPPORTS: Cast iron.
SLATS: 2” x 4” nominal. Available with #1 pressure treated southern yellow pine, clear all heart, free of heart center redwood,
clear douglas fir, or recycled plastic.
HARDWARE: Zinc plated.
FINISH: Polyester powder coated supports.
• Bench may be free standing or surface mounted.
MODEL NO.
740-6T 6’ Treated Pine - 2 supports
740-6R 6’ Redwood - 2 supports
740-6D 6’ Douglas Fir - 2 supports
740-6PL 6’ Recycled Plastic - 3 supports
NOTE: Custom sizes available upon request and availability.
|
| 296 PARK BENCH |
 |
SUPPORTS: 1/2” x 2” steel bar. One-piece welded unit. May be surface mount or freestanding.
SEAT SURFACE: 1/4” x 1 1/2” steel bar and 1 5/16” O.D. steel pipe.
FINISH: Polyester powder coated.
MODEL NO.
296-6 6’ Steel Park Bench |
| 750 Park Bench |
CROSS BRACE: 1 5/16” O.D.
galvanized pipe.
CENTER STRAP: 1/4” x 1” steel
bar.
|
SLATS: 2” x 3” nominal. Available with #1 pressure treated southern yellow pine, clear all heart, free of heart center redwood, or clear douglas fir.
HARDWARE: Zinc plated.
FINISH: Polyester powder coated frame. Bench may be free standing or surface mounted.
MODEL NO.
750-6T 6’ Treated Pine
750-6R 6’ Redwood
750-6D 6’ Douglas Fir
750-8T 8’ Treated Pine
750-8R 8’ Redwood
750-8D 8’ Douglas Fir
NOTE: Custom sizes available
upon request and availability.
|
| 439 Steel Park Bench |
|
|
SUPPORTS: 1/2” x 2” steel bar. One-piece welded unit. May be surface mount or freestanding.
SEAT SURFACE: 1/4” x 1 1/2” steel bar and 1 5/16” O.D. steel pipe.
FINISH: Polyester powder coated.
|
|
|
| Tables |
(Click to enlarge images)
|
| 883-887 Picnic Table |
|
|
|
| 800-6T Picnic Table |
 |
800 SERIES PICNIC TABLE
FRAME: 1 5/8” O.D. galvanized pipe.
BRACES: 1 5/16” O.D. galvanized pipe.
SLATS: 2” x 10” nominal. Available with #1 pressure treated southern yellow pine, anodized aluminum, or recycled plastic.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds. |
| 1015 SERIES PICNIC TABLE |
 |
FRAME: 2 3/8” O.D. galvanized pipe.
TOP & SEAT ANGLES: 10 ga. galvanized steel.
BRACES: 1 5/16” O.D. galvanized pipe.
SLATS: 2” x 10” nominal. Available with #1 pressure treated southern yellow pine, anodized aluminum, or recycled plastic.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe. |
1050 SERIES PICNIC TABLE
|
 |
FRAME: 2 3/8” O.D. galvanized pipe.
BRACES: 1 5/16” O.D. galvanized pipe.
SLATS: 2” x 10” nominal. Available with #1 pressure treated southern yellow pine, anodized aluminum, or recycled plastic.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds. |
| 997 SERIES PICNIC TABLE |
 |
FRAME: 3 1/2” O.D. galvanized pipe and 2 7/8”
O.D. galvanized pipe. Permanent mount.
SLATS: 2” x 10” nominal. Available with #1 pressure treated southern yellow pine, or anodized aluminum.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds.
MODEL NO.
997 Frame Only
997-6T 6’ Treated Pine Picnic Table
997-6A 6’ Aluminum Picnic Table |
|
|
| Trash Receptacles |
(Click to enlarge images)
|
| 360 Trash Receptacle |
|
|
TOP RING: 5/8” diameter steel bar.
VERTICAL MEMBERS: ?” x 1 ?” steel bar.
BASE RING: ?” x 3” steel bar.
COVER: 14 gauge spun steel with vinyl coated steel cable.
LINER: 32 gallon plastic.
FINISH: Polyester powder coated.
• May be freestanding or anchored to surface.
MODEL NO.
360 .... 32 Gallon Steel Receptacle
|
| 322-332 Trash Receptacle |
 |
TOP RING: 3/4” diameter steel bar.
VERTICAL MEMBERS: 1/4” x 2” and 1/4” x 1” steel
bar.
BASE RING: 1/4” x 3” steel bar.
COVER: 14 gauge spun steel with vinyl coated steel
cable.
LINER: 22 or 32 gallon plastic.
FINISH: Polyester powder coated.
• May be freestanding or anchored to surface.
MODEL NO.
322 22 Gallon Steel Receptacle
332 32 Gallon Steel Receptacle |
| 343-3PL Trash Receptacle |
FRAME: 1/4” x 2” and 1/4” x 1” steel bar.
SUPPORT: 2 3/8” O.D. steel pipe.
|
SLATS: 2” x 4” nominal. Available with #1 pressure treated southern yellow pine, clear all heart, free of heart center redwood, clear douglas fir, or recycled plastic.
LINER: 22 gallon or 32 gallon plastic.
HARDWARE: Zinc plated.
FINISH: Polyester powder coated frame
• Receptacle factory assembled
• Choice of permanent or surface mount support.
MODEL NO.
#343-2T 22 Gallon Treated Pine
#343-2R 22 Gallon Redwood
#343-2D 22 Gallon Douglas Fir
#343-2PL 22 Gallon Recycled Plastic
#343-3T 32 Gallon Treated Pine
#343-3R 32 Gallon Redwood
#343-3D 32 Gallon Douglas Fir
#343-3PL 32 Gallon Recycled Plastic
|
349 RECEPTACLE
|
FRAME: 2” x 1” x 11 gauge wall and 2” x 2” x 11 gauge wall steel tubing.
|
DECORATIVE PANELS: 3/8” thick steel.
COVER: 11 gauge steel with stainless steel hinge and vinyl coated steel cable.
PANEL LINER: 18 gauge steel.
LINER: 22 gallon plastic.
FINISH: Polyester powder coated.
• Choice of permanent, surface mount or free standing supports.
MODEL NO.
349-1 Permanent Mount
349-2 Surface Mount
349-3 Free-Standing
|
345 RECEPTACLE
|
 |
RECEPTACLE BODY: 1/4” x 2” steel bar.
DECORATIVE RINGS: 1/2” diameter x 4” O.D. steel.
COVER: 14 gauge spun steel with vinyl coated steel
cable.
LINER: 32 gallon plastic.
FINISH: Polyester powder coated.
• May be freestanding or anchored to surface.
MODEL NO.
345 32 Gallon Steel Receptacle |
| 250 Trash Receptacle |
FRAME: 1/8" x 1" steel bar and 3/8" diameter steel bar.
SUPPORT: 1 7/8" O.D. steel pipe for permanent support and 1/8" x 4" steel bar formed ring for portable mount.
SLATS: 1" x 3" nominal. Available with #1 pressure treated southern yellow pine or clear redwood.
LINER: 22 gallon or 32 gallon plastic.
HARDWARE: Bright zinc plated.
FINISH: Frame and support powder coated black.
|
• Receptacle factory assembled.
PERMANENT MODEL NO.
250T . . . 22 Gallon Treated Pine
250R . . . 22 Gallon Redwood
235T . . . 32 Gallon Treated Pine
235R . . . 32 Gallon Redwood
PORTABLE MODEL
248T . . . 22 Gallon Treated Pine
248R . . . .22 Gallon Redwood
236T . . . 32 Gallon Treated Pine
236R . . . 32 Gallon Redwood
|
| 318 Ash Urn |
 |
VERTICAL MEMBERS: ?” x 1 ?” steel bar.
BASE RING: ?” X 2” steel bar.
ASH TOP: 10” diameter spun aluminum with
vinyl coated steel cable.
FINISH: Polyester powder coated.
• May be freestanding or anchored to surface.
MODEL NO.
318 . . . Steel Ash Urn
|
|
|
| Playgrounds |
(Click to enlarge images)
|
| 1402 Park Rainbow Climber |
|
|
|
| 1362 Park Spinner |
|
|
|
| 1779 Park Hex Climber |
|
|
|
| 1347 3-Hoop Goal |
 |
|
| 1080 Park Swings |
 |
|
| 1309 Animal Riders |
|
|
Many other horse colors and animals available.
|
BASKETBALL GOOSENECK SUPPORTS FOR STEEL & ALUMINUM BACKBOARDS:
|
 |
|
|
|
| Bike Racks |
(Click to enlarge images)
|
| 1643 SERIES BIKE RACK |
1643 Bike Rack
|
RACK: 2 3/8” O.D. galvanized pipe.
Available in permanent or surface mount.
FINISH: Available in natural galvanized pipe or polyester powder coated finish. Loop bike racks also available in stainless steel for additional cost.
NOTE: Permanent style is standard. For surface mount add —SM to the model number.
|
| 1621-1625 Bike Rack |
|
|
FRAME: 1 5/8” O.D. galvanized pipe with
ends capped.
SPOKES: 1/2” diameter hot dip galvanized solid steel.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds.
MODEL NO.
1621 5’ Double Face - 8 Bike capacity
1622 10’ Double Face - 18 Bike capacity
1625 5’ Single Face - 4 Bike capacity
1624 10’ Single Face - 9 Bike capacity |
| 1610 10’ Double Face - 18 Bike capacity |
1610 Bike Rack
|
1611 Bike Rack
|
|
FRAME: 1 5/8” O.D. galvanized pipe with ends capped.
SPOKES: 1/2” diameter hot dip galvanized solid steel.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds.
MODEL NO.
1611 5’ Double Face - 8 Bike capacity
|
1614 & 1618 BIKE RACK
|
 |
FRAME: 1 5/8” O.D. & 1 5/16” O.D. galvanized pipe with ends capped.
SPOKES: 1/2” diameter hot dip galvanized solid steel.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds.
MODEL NO.
1614 10’ Double Face - 18 Bike capacity
1618 20’ Double Face - 36 Bike capacity
|
|
|
